Radio, Cassette tape, Sound setting – Panasonic CQ-2130U User Manual

Page 15

Advertising
background image

CQ-2130U

15

Much noise in FM stereo
and monaural broad-
casts.

Trouble

The antenna ground lead is not connected properly.

a

Connect the antenna ground lead properly.

The radio antenna is not extended enough.

a

Extend fully the radio antenna.

Preset station is reset.

Battery cable is not correctly connected.

a

Connect the battery cable to the terminal that is always active.

Cause/Step

Radio

No sound.

Trouble

Blank tape is inserted in the unit.

a

Insert recorded tape into the unit.

Tape sound quality is
poor.

Heads are dirty.

a

Clean heads. (Ask a service representative for advice.)

Reproduction of high
tones is poor.

Heads are magnetized.

a

Demagnetize heads. (Ask a service representative for advice.)

Wow and flutter level is
very high.

Tape running mechanism is dirty or out of order.

a

Clean tape running mechanism, or repair it. (Ask a service represen-
tative for advice.)

Poor quality tape.

a

Use better quality tape.

Cause/Step

Cassette Tape

No sound from left, right,
front, or rear speaker.

Trouble

Left and right balance, or front and rear balance is off on one side.

a

Adjust BAL/FAD as appropriate.

Left and right sounds are
reversed in stereo listen-
ing.

The right speaker wire is connected to the left speaker and the left speaker
wire to the right speaker.

a

Connect the speaker wires to the correct one.

Cables are not correctly connected.

a

Connect the cables correctly.

Cause/Step

Sound Setting

Advertising