Specifications, General, Fm stereo radio – Panasonic CQ-2130U User Manual
Page 22: Am radio, Tape player
CQ-2130U
22
Specifications
❐ General
Power Supply:
12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground
Current consumption:
Less than 2.5 A (tape mode, 0.5 W 4-speaker)
Maximum Power Output:
37 W
× 4 channels at 400 Hz, Volume Control maximum
Tone adjustment range:
Bass:
± 12 dB at 100 Hz
Treble:
± 12 dB at 10 kHz
Power Output:
18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD
Suitable Speaker Impedance:
4-8
Ω
Dimensions (W
× H × D):
7"
Ч 1-15/16" Ч 6-1/10" (178 Ч 50 Ч 160 mm)
Weight:
3 lbs. 8 oz. (1.6 k )
❐ FM Stereo Radio
Frequency Range:
87.9-107.9 MHz
Useable Sensitivity:
12 dBf. (1.1 µV, 75
Ω, S/N 30 dB)
50 dB Quieting Sensitivity:
17 dBf. (1.8 µV, 75
Ω)
Frequency Response:
30-15 000 Hz ±3 dB
Alternate Channel Selectivity:
75 dB
Stereo Separation:
35 dB at 1 kHz
Signal/Noise Ratio:
70 dB (Mono)
❐ AM Radio
Frequency range:
530 kHz–1 710 kHz
Usable sensitivity:
28 dB/µV (25 µV, S/N 20 dB)
❐ Tape Player
Reproduction System:
4-track, 2-program stereo
Tape Speed:
1-7/8"/sec (4.76 cm/sec)
FF/REW Time:
Less than 200 sec (C-60)
Frequency Response:
35-14 000 Hz ±3 dB
Wow and Flutter:
0.12 % (WRMS)
signal/Noise Ratio:
52 dB
Above specifications comply with EIA standards.
Note: Specifications and design are subject to modification without notice due to improvements in technology.