Panasonic CQ-2130U - Manual (Page 21)

CQ-2130U
21
Cautions:
• This wiring information is for experienced technical individual, for safety reason, please your dealer wire this con-
nection.
• This product is designed to operate with a 12 V DC, negative ground battery system.
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
• Remember, if your car has a drive computer or a navigation computer, the data of its memory maybe erased
when the battery terminals are disconnected.
❐ Wiring Diagram
CQ-2130U
10 12 14 16
7
8 6 4 2
5 3 1
9 11 13 15
Accessory Power(ACC)
(+12V DC, negative ground
only)
Ground Lead
(Connect to a clean, bare
metallic part of your vehicle)
Battery Lead
(Connect to vehicle battery)
(Red)
ACC
Ground (Black)
(Yellow) Battery
(Violet)
(Violet/Black) (Gray/Black)
(Green)
(Green/Black)
(White/Black)
(Gray) (white)
Left Speaker
(Front)
Right Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Rear)
Power Connector
Antenna
o Antenna Connector
Detail of power connector
NO. FUNCTION NO. FUNCTION
1 BATTERY +12 V 9 REAR SP R (–)
2 GROUND 10 REAR SP R (+)
3 ůůůů 11 FRONT SP R (–)
4 ůůůů 12 FRONT SP R (+)
5 ůůůů 13 FRONT SP L (–)
6 POWER +12 V ACC 14 FRONT SP L (+)
7 ůůůů 15 REAR SP L (–)
8 ůůůů 16 REAR SP L (+)
The power connector does not come
along with the unit. If need, please
consult your dealer. ŏ
Electrical Connections