Precor Low Impact M9.33 - Manual (Page 20)

Owner’s Manual: Display Console 18
The incline setting affects the column height in the
program profile as shown in Diagram 7.
Diagram 7: Column height affected by changes in incline
The height of the column indicates the level of incline.
Every time the incline changes by four sequential levels
(up or down) the height of the column changes by one
row.
Note: During the setup phase, pressing the INCLINE
arrow keys will not affect the incline. However, the arrow
keys do affect what appears on the display. Refer to
Selecting a Program.
SELECT: The SELECT keys have three functions:
• To select a user ID before starting a workout. Refer to
Selecting a User ID.
• To get specific information during a workout. Each
SELECT key affects the column above it. Indicator
lights appear next to the item that is displayed.
• To activate scanning mode and select the information
that appears. Refer to Changing the Display
Features Using the SELECT Key.
RESET: During pause mode, press the RESET key to
display a WORKOUT SUMMARY. Press RESET again
to return to the Precor banner.
QUICKSTART: Press QUICKSTART to bypass the
setup prompts and start you workout immediately
using the Manual program. Refer to Choosing
QUICKSTART.
STOP: A firm tap on the red STOP button slows the
running belt to a stop and the treadmill enters pause
mode. To resume, enter your password and press the
SPEED
▲ key to resume. Refer to Pausing During a
Workout or the Cool-Down Period.
ENTER: Use the ENTER key to confirm responses to
workout-specific prompts.
0 to 2
4 to 5
5 to 6
7 to 8
9 to 10
11 to 12
13 to 14
Column height Incline Setting