Precor Low Impact M9.33 - Manual (Page 41)

Owner’s Manual: Advanced Programming and Troubleshooting 39
Selecting Password Protection
Note: The password protection program is part of a two-part
sequence that starts with the steps found in Selecting a U.S.
Standard or Metric Display.
6. At the password prompt, specify ENABLED or DISABLED,
using the arrow keys to switch between settings.
CAUTION: Precor recommends that you leave the
password protection enabled. If you choose to
change the security of the treadmill, it is your
responsibility to make sure that no unauthorized
personnel or children are allowed on or near the
treadmill.
7. Press ENTER to accept the displayed setting.
The change will be retained in memory even when the
treadmill is turned OFF and unplugged.
8. To end the programming mode and return to the Precor
banner, press RESET.
Setting Description
Password Enabled Causes the password prompt to
appear prior to a workout and
when returning from Pause mode.
Password Disabled Lets you turn off the password
prompt. Use this setting with
caution.