Panasonic CQ-CB9900U - Manual (Page 8)

14
CQ-CB9900U CQ-CB9900U
15
Radio
[ %] [$]
(TUNE)
[D/A] (Digital*/Analog)
*This indicates HD Radio. [SOURCE]
6 4
9 7
5
Car Audio
SOURCE
MUTE
POWER
RAND
VOL
3 1 2
DISP BAND
REP
6 5
SET
SEL
#
SCAN
MENU
NUMBER
8
0
[SOURCE]
[ %] [$]
(Tuning)
[BAND]
Stereo indicator
This lights
when a stereo
broadcast is
received.
Radio Mode
Press [SOURCE] to select the radio mode.
Radio mode display
1 Reception Mode
Press [D/A] to select the reception mode.
3
Frequency Band
Band
Press [BAND].
2
FM1
Tuning
[ $]: Higher frequency
[ %]: Lower frequency
4
AUTO mode ** (“AUTO” lights.)
Selects analog or digital reception
(HD Radio) automatically. (default)
Seeking
When the reception mode is “AUTO”:
1 Every time you press and hold [D/A] for more
than 2 seconds, Seeking mode is switched as
follows;
2 Press and hold [ %] or [$] for more than
0.5 seconds, then release. Seeking will start.
When “Auto seeking” is selected:
The tuning automatically stops at the stations,
whether analog or digital, whose signals can be
received, and the signals from those stations are
received.
When “Digital seeking” is selected:
The tuning automatically stops only at the
stations which are airing digital broadcasts, and
the signals from those stations are received.
The seeking operation is repeated if no digital
broadcasts are being aired.
When the reception mode is “ANALOG”:
Press and hold [
%] or [$] for more than
0.5 seconds, then release. Seeking will start.
Auto seeking (default)
Digital seeking
This lights when the broadcast station now being received is
an HD Radio station (one which is airing a digital broadcast).
ANALOG mode
Selects analog reception only.
** Identifying whether a broadcast
is digital or analog in the AUTO
mode
When “DIGITAL” is displayed:
This means that digital sound is
now being output. (It is displayed
while a digital broadcast is being
received.)
When “ANALOG” is displayed:
This means that analog sound is
now being output. (It is displayed
while an analog broadcast is
being received.)
Note:
≥ Even when the AUTO mode is established and the
HD indicator is lighted:
· The sound may not switch over to digital if the
program concerned (such as a live baseball
game) is being broadcast in real time.
· Analog sound will be output if the reception is
poor.
≥ In the AUTO mode, analog sound is output
immediately after the frequency has been tuned
in. When listening to analog sound, the sound
quality will be better in the ANALOG mode.
FM2
FM3
AM
Note:
≥ Digital seeking may take some time.
≥ Seeking may not stop at stations which are
scheduled to go all-digital broadcasts in the future.
D·SEEK indicator
This lights when digital
seeking is selected.
This lights when reception
mode is “AUTO”.
This lights when a digital broadcast is
being received in AUTO mode.
[BAND]