Primera Technology CX1200 - Manual (Page 15)

Install Software 11
Three pieces of software will need to be installed in order to print to the CX1200:
• The CX1200 Printer Driver. This software allows a networked or local computer to
communicate with the CX1200 via the included Ethernet cable or Ethernet crossover cable.
• PTPrint. This software allows you to import an existing file and arrange it across a page ( step
and repeat ). This software is a full featured lay out software that supports imbedding or linking
many different files types. It is not a design software. Only one copy of the print software can
be used with each CX1200. This ensures proper supply level tracking.
• Status Monitor. This installs automatically along with PTPrint. This allows you to estimate ink
costs for a particular label and accurately track toner and label stock supplies.
1. To install the software place the CD in your CD-Rom Drive. The Installer application should
automatically launch in a few moments. If it does not automatically launch, follow these steps:
• Double-click the My Computer Icon, then double-click the icon of the appropriate CD drive
containing the Software Installer disc.
• Double-click setup.exe
2. Follow the prompts in the software installer to complete the installation of the software.
Note: If you connect your PC to the CX1200 using a yellow crossover cable it may be necessary to
disable or modify the settings of your antivirus/firewall program.
Section 3: Install Software
TOC INDEX