Primera Technology CX1200 - Manual (Page 23)

Create a Print File 19
6. You may adjust the position of the target/eye mark to be in one or more areas depending on the
requirements of your cutter.
7. If you are using a fixed die or a rotary die you can set the length here. Rows and columns
per page will be automatically adjusted.
Important Note: Check Using Fixed Die
only if you are using a full rotary drum die
cutter with minimal (1mm) reregistering
capability. If you are using a flexible die
with per page reregistration capability you
do not need to check this box
TOC INDEX