Primera Technology CX1200 - Manual (Page 18)

14 Load Label Stock
5. Place an empty label core on the rewinder chuck. Push the core all the way back until it touches
the back label guide disc.
6. Place the outer label guide disc on to the rewinder chuck. Push the guide until it touches the
rewinder core. Turn the tension know clockwise to secure the core and the label guide to the
chuck.
Note: Some cores may be shorter than the the stock width. If so, make sure the distance between the label
guide discs is slightly larger than the stock width.
Figure 4-5.
Figure 4-6.
TOC INDEX