Paradise 205486 REV F - Manual (Page 125)

Operations Manual, HPA2, Compact Outdoor SSPA 208495 REV C 125
10.2.2.2 Setting IPNet interface
To set up the Compact Outdoor SSPA with custom IP parameters, the internal IP settings
need to be modified by using Teledyne Paradise Datacom’s Universal M&C, version 4.4.3 or
later. See Section 3.3.3.3.
10.2.2.3 Troubleshooting IP connectivity
Check IP connectivity to the SSPA unit. To do so on a Windows-based PC, open a Command
Prompt window and type the following command: PING 192.168.0.9, then press the Enter
key. If the unit is successfully found on the network, the request statistic will be displayed.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Ping 192.168.0.9
Pinging 192.168.0.9 with 32 bytes of data:
Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.9:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
If this step is successfully completed, a default Ethernet connection is set and ready to use.
If the unit does not answer on the ping command, check all hardware connections. Consult
your network administrator for further details.