Paradise 205486 REV F - Manual (Page 70)

70 208495 REV C Operations Manual, HPA2, Compact Outdoor SSPA
e) In the case of IPNet or SNMP protocols, clear the PC ARP cache by issuing the
following command in a Windows command line interface: arp –d.
f) Binary and Terminal protocols are no longer supported by Compact Outdoor units. Use
the currently available interfaces instead.
7.3.5 The FSK link between a modem and the SSPB unit is not working
Possible cause: The unit is set to use IPNet or SNMP interface.
Possible solution: Set the SSPB protocol setting field to “Normal” protocol or (and) remove
any connection to SSPB interface select pins j and e on the J4 connector. Reset AC power.