Paradise 205486 REV F - Manual (Page 46)

46 208495 REV C Operations Manual, HPA2, Compact Outdoor SSPA
As the applet loads, the user will be prompted to enter a password. The default password is
paradise (see Figure 3-20), but the user may assign a new password using the web M&C or
Teledyne Paradise Datacom’s Universal M&C Software. See Section
3.4
for details on using
the Universal M&C Software.
3.5.1 Navigating the Web M&C
The SSPA Monitor and Control is performed via following the links on the web page. These
links include Status and Faults, Communications Settings, General Settings and Fault
Settings.
•
Status and Faults Window: A view of critical SSPA operational parameters. See
Figure 3-21 for descriptions of some of the functions available in this window.
Figure 3-20: Enter password (default is “paradise”)
Green indicates
no Faults;
Red indicates a
fault exists
Figure 3-21: Status and Faults window descriptions
Indicators for
Connection, Mute
and Online states
and Summary
Alarm.
Displays various
voltages, current
draw, Output Pow-
er and BUC refer-
ence.
Displays
Attenuation and
Temperature
values.
Upper section is
common to all
windows; displays
Model Number,
Serial Number,
Firmware version,
and IP, MAC and
Network addresses