Prep ara tion – Pioneer VSX-D908TX User Manual

Page 23

Advertising
background image

23

Displays and Controls

PREP

ARA

TION

= EXTERNAL DECODER IN button (See

p.47)

Use to hook up an external component that can
decode other types of signals and input them into
the VSX-D908TX/D908TX-G.

~ DIRECT button

Switches direct playback on or off. Use to bypass
the tone controls and channel level for the most
accurate reproduction of a program source. It will
automatically put the receiver in STEREO mode
for that function being used for DIRECT playback.

! LOUDNESS button (See p.48)

Switches the LOUDNESS mode on or off.

@ MIDNIGHT MODE button (See p.46)

Switches the MIDNIGHT LISTENING mode on or
off.

# DIGITAL NR button (See p.45)

Switches the DIGITAL NR on or off (STEREO
mode only).

$ SIGNAL SELECT button (See p.42)

Use to select the signal from the digital
components.
SIGNAL SELECT repeatedly to select one of the
following:
ANALOG : To select an analog signal.
DIGITAL : To select a optical or electrical digital
signal.

% TUNER CONTROL button (See p.50-53)

CLASS : Press repeatedly to switch the preset
station classes.
FM/AM : Press to select the AM or FM band.
TUNING –/+ : Use to manually tune to radio
stations.

^ STATION –/+ buttons (See p.52-53)

Use to choose programmed radio stations.

& MEMORY button (See p.52)

Press to start the memorization of a preset
station.

* MPX button (See p.50)

Press to switch between auto stereo and MONO
reception of FM broadcasts. When the broadcast
signal is weak, selecting MONO will improve the
sound quality.

( INPUT ATT button

Use to lower the input level of an analog signal
that is too powerful, thus causing the receiver to
distort (the overload indicator will light furiously).

) TREBLE (–/+) buttons (See p.48)

Use to adjust the high frequencies.

_ BASS (–/+) buttons (See p.48)

Use to adjust low frequencies.

+ SPEAKERS (A/B) buttons

A is the primary setting. It plays all speakers
hooked up to the A system. A and B setting only
plays the front speakers of both the A and B
systems and the sub-woofer, multi channel
sources will be down-mixed to these speakers so
no sound will be lost. B setting only plays the
front speakers connected to the B system and
multi channel sources will be down-mixed to
these two speakers.

¡ VIDEO INPUT jacks (See p.9)

S-VIDEO : Video input for connecting a video
camera (etc.), that has an S-Video out.
VIDEO / AUDIO (L/R) : Video input for
connecting a video camera, etc. that has standard
video/audio outputs.

PHONES jack

Connect headphones for private listening (no
sound will be heard through the speakers)

A

A+B

OFF

B

Advertising
This manual is related to the following products: