Pioneer VSX-D908TX - Manual (Page 34)

34
Surround Sound Set Up
Crossover network
The following steps show you how to adjust the crossover network. The crossover network is the frequency at
which the system divides the signal and sends the different parts (high ,mid, low) to different speakers.
Speaking precisely, this setting sets the cutoff point for the bass frequencies rerouted from your SMALL
speakers to your sub woofer or speakers set to LARGE. If continuing from CHANNEL LEVEL go to step 1. If
starting fresh, complete steps 1-3 in “Setting Up for Surround Sound” (p.27) first.
1
Select CROSSOVER NETWORK (if continuing from
CHANNEL LEVEL, it will already be selected).
See “Setting Up for Surround Sound” on page 27 if you are unsure
how to do this.
Press ENTER.
Crossover Network
Frequency [ 80Hz ]
(THX Speaker = 80Hz)
[EXIT]
The default setting is 80 Hz.
2
Specify the crossover frequency for your small
speakers.
Setting speakers to SMALL in “SPEAKER SETTING” sends the
respective channel’s bass frequencies to the sub woofer (or LARGE
speakers). The present function lets you determine which
frequencies will be sent to the sub woofer or LARGE speakers.
1 Press
2 or 3 to move the cursor to 80 Hz, 100 Hz, or
150 Hz.
2 Press ∞.
80 Hz
Sends bass frequencies below 80 Hz to the sub woofer (or LARGE
speakers).
100 Hz
Sends bass frequencies below 100 Hz to the sub woofer (or
LARGE speakers).
150 Hz
Sends bass frequencies below 150 Hz to the sub woofer (or
LARGE speakers).
As noted on your TV screen the THX setting is 80 Hz. Select this
setting if you have THX approved SMALL speakers.
Experiment with the different settings to see which sounds best to
you.
3
Select EXIT to return to the SYSTEM SETUP MENU.
Next, proceed to BASS PEAK LEVEL MANAGER below.
If you want to change a setting before proceeding
Select a new crossover frequency.
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DIGITAL NR
MIDNIGHT
ADVANCED STANDARD
DSP
THX
MUTE
TV
VOLUME
MD/ TAPE1 TUNER TV CONT
RECEIVER
MULTI OPERATION
CLASS MPX
MULTI CONTROL
DIRECT ACCESS
STATION
CHANNEL
TUNING
DISPLAY RF ATT
TV CONTROL
FUNCTION
SIGNAL
SELECT
EFFECT /CH SEL
2 /dts
AV PREPROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
REMOTE
SETUP
SYSTEM
SETUP
BAND
SYSTEM OFF
1 2 3
4 5 6
7
+10
8 9
0 DISC
Î
¶ 7 3 8
1 ¡ 4 ¢
+ - + -
+ -
MPEG
1-3
VSX-D938TX