Pioneer VSX-D908TX - Manual (Page 71)

71
Using Other Functions
OPERA
TION
System OFF
The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and turn off with
the push of only one button on the remote control. For example, you can program the unit to stop your DVD,
turn off your TV, turn off your DVD player and turn off the receiver itself. You do not need to program in other
the power for PIONEER components, they will go off automatically in this mode. The receiver itself will go off
automatically as well.
The steps below show you how to program a string of up to 5 different SYSTEM OFF operations based on eight
possible components.
Be sure to recall or teach the remoto control commands for each component before attempting
multi operations (see “Setting Up the Remote Control to Control Other Components,” p.54).
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DIGITAL NR
MIDNIGHT
ADVANCED STANDARD
DSP
THX
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TV CONT
RECEIVER
MULTI
OPERATION
CLASS MPX
MULTI CONTROL
DIRECT ACCESS
STATION
CHANNEL
TUNING
DISPLAY RF ATT
TV CONTROL
FUNCTION
SIGNAL
SELECT
EFFECT
/CH SEL
2/dts
AV PREPROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
REMOTE
SETUP
SYSTEM
SETUP
BAND
SYSTEM
OFF
1 2 3
4 5 6
7
+10
8 9
0 DISC
Î
¶ 7 3 8
1 ¡ 4 ¢
+ - + -
+ -
MPEG
1
VSX-D938TX
1
5-
2
5-
1
4
1
3
Using the system off button
This button will turn off the receiver and any component that has programmed into the SYSTEM OFF settings
(see above) as well as turn off all PIONEER components regardless of whether they have been programmed
into SYSTEM OFF. If you use this feature when a DVD is playing, the player will stop the play mode before
switching off.
1
Press REMOTE SETUP and 3 at the same time to
select the MULTI OPERATION SETUP mode.
The REMOTE SETUP menu appears on your TV screen. The MULTI
CONTROL and the SYSTEM OFF buttons start to blink.
To cancel MULTI OPERATION SETUP mode
Press REMOTE SETUP.
2
Press SYSTEM OFF.
The SYSTEM OFF button will blink.
3
Press MULTI CONTROL for the component whose
operation you want to start SYSTEM OFF with (for
example, TV CONT button).
The selected button will light steadily.
4
Press the operation, for example TV (POWER), you
want to lnput.
5
Repeat steps 3 and 4 to input SYSTEM OFF for the
components and commands you want to input.
You can repeat this process for up to five commands.
For example: You could enter the following two operations using
the proceeding steps 3 and 4.
1 Press TV CONT button and TV (POWER) to turn off your TV
(as explained above).
2 Press DVD/LD then (POWER) to turn off your DVD player (if it
is not a PIONEER product).
When you employ SYSTEM OFF (see below), these two tasks
will be performed in the same order.
To exit SYSTEM OFF SETUP mode
Press REMOTE SETUP.
1
Press SYSTEM OFF on the remote control.
S0URCE RECEIVER
MULTI
OPERATION
SYSTEM
OFF
О
1