Panasonic AJ-D610WBp - Manual (Page 137)

– 137 –
: L E N S NORM
L E N S A D J
{
A D J
A D J
F 2 . 8
F 1 6
¢|
S E L /
C S E L E
: O F F
: O F F
T
T I ME / D A T E
Y E A R :
:
:
:
: 9 9
MON T H 0 1
D A Y 0 1
HOU R 0 0
M I N U T E 0 0
T I ME / D A T E » S E T
{ ¢|
{
V I D E O
V I D E O
OU T
OU T S E L :
:
E N C
C H A R A C T E R ON
¢|
Item
VIDEO OUT SEL
CHARACTER
Variable
range
MONI
ENC
ON
OFF
Remarks
This selects whether to switch the
VIDEO OUT signals to monitor signals
or to the encoder signals.
This selects whether to display
characters in the VIDEO OUT signals.
ON: Characters are displayed.
OFF: Characters are not displayed.
VF
display
ENG
ENG
MAIN Menu Screen 3 of 4 (SUB menus)
VIDEO OUT screen
The VIDEO OUT items are set on this screen.
TIME/DATE screen
The date and time are set on this screen. When the UP or DOWN button is pressed after the date and/or time have been
changed, the settings will be entered.
| Note {
When using a lens which enables the open and close limits of the lens iris to be ad-
justed, set either F2.8 ADJ or F16 ADJ to ON, and repeatedly adjust the lens iris until
it is set to F2.8 or F16, respectively. (This adjustment need not be performed if the
lens does not have this adjustment function.)
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu:
The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
| Note {
Seconds cannot be set. The time always starts from the zero second setting.
LENS SEL/ADJ screen
The lens adjustment items are set on this screen.
Item
YEAR
MONTH
DAY
HOUR
MINUTE
TIME/DATE SET
Variable
range
00 to 99
1 to 12
1 to 31
0 to 23
0 to 59
——
Remarks
This sets the year.
This sets the month.
This sets the day.
This sets the hours.
This sets the minutes.
This enters the time/date settings.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
Item
LENS SELECT
F2.8 ADJ
F16 ADJ
Variable
range
NORM
R.COV
ON
OFF
ON
OFF
Remarks
NORM: This is selected when the
normal lens is used.
R.COV: This is selected when a lens
with an X0.8 ratio converter is used.
The voltage is output only when
selected to ON.
The voltage is output only when
selected to ON.
VF
display
ENG
ENG
ENG