Panasonic AJ-D610WBp - Manual (Page 90)

– 90 –
Setup Card Operations
Writing set data to cards
1
Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP
button are held down together.
2
Press the PAGE button to display the MAIN menu screen 3 of 4.
3
Press the SHIFT/ITEM button to move the cursor to the “CARD READ/WRITE” position.
4
Press the UP or DOWN button to open the CARD READ/WRITE page.
5
Press the SHIFT/ITEM button repeatedly to move the cursor to the WRITE position.
6
A menu shown below appears when the UP (or DOWN) button is pressed.
7
Press the UP button to write data on the set up card. When writing is complete, the message
shown below appears.
8
When menu operations have been completed, return the MENU SET/OFF switch to OFF.
The setting menu disappears from the viewfinder screen and the displays indicating the unit’s
current status appear at the top and bottom of the viewfinder screen.
{
C A R D
C A R D
R E A D
R E A D
/ WR I T E
WR I T E
R E A D
S E L E C T
S E L E C T
1
1
CON F I G
U S E R D A T A
¢|
{
C A R D
C A R D
R E A D
R E A D
/ WR I T E
? ( Y : U P . N :
WR I T E
WR I T E
R E A D
DOWN )
S E L E C T
S E L E C T
1
1
CON F I G
U S E R D A T A
|
¢
{
C A R D
C A R D
R E A D
R E A D
/ WR I T E
WR I T E
WR I T E
R E A D
S E L E C T
S E L E C T
1
1
CON
O K
F I G
U S E R D A T A
|
¢