Panasonic AJ-D610WBp - Manual (Page 79)

– 79 –
Setting the Electronic Shutter
Setting the Synchro Scan Mode
1
Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP
button are held down together.
2
Press the PAGE button to display the MAIN menu screen 2 of 4.
3
Press the SHIFT/ITEM button to move the cursor to the “SYNCHRO SCAN” position.
4
Press the UP or DOWN button to open the SYNCHRO SCAN page.
5
Press the UP (the value increases) or DOWN (the value decreases) button repeatedly to
display the desired frequency. The frequency can be switched continuously within the range
of 60.8 Hz to 250 Hz.
6
When menu operations have been completed, set the MENU SET/OFF switch to OFF. The
setting menu disappears from the viewfinder screen and the displays indicating the unit’s
current status appear at the top and bottom of the viewfinder screen.
Pressing the SYNCHRO (“
o
” and “
p
”) buttons in the SYNCHRO SCAN mode results in the
same operation which is performed when the UP and DOWN buttons mentioned above are
pressed.
S Y N C H RO S C A N
1 / 6 0 . 8
{ ¢|