Panasonic AJ-D610WBp - Manual (Page 89)

– 89 –
Setup Card Operations
When data is not formatted
If the following error messages appear when the UP button is pressed in step 7, the data is not
formatted.
Data format error messages
Set the write protect switch
on the side of the card to
OFF.
Insert a card.
The card may be
defective. Replace the
card.
Error message
WRITE PROTECT
NO CARD
ERROR
Condition
The write protect switch on
the side of the card is set
to ON.
A setup card is not
inserted.
The disk cannot be
formatted.
Countermeasure