Speaker distance bass peak level, The system setup menu 07, Speaker distance – Pioneer VSX-82TXS-S User Manual

Page 45: Bass peak level

Advertising
background image

The System Setup menu

07

45

En

Tip

• You can change the channel levels at any time by

pressing

CH LEVEL

then using

/

on the remote

control.

Speaker Distance

For good sound depth and separation from your system,
you need to specify the distance of your speakers from
the listening position. The receiver can then add the
proper delay needed for effective surround sound.

1

Select ‘Speaker Distance’ from the Manual SP Setup

menu.

2

Adjust the distance of each speaker using the

/

buttons.

You can adjust the distance of each speaker in 0.5 feet
increments.

3

When you’re finished, press

RETURN

.

You will return to the Manual SP Setup menu.

Tip

• For best surround sound, make sure the surround

back speakers are the same distance from the
listening position.

Bass Peak Level

Some audio sources (for example, Dolby Digital and DTS)
include ultra-low bass tones. Set the bass limiter as
needed to prevent the bass from distorting the sound.

1

Select ‘Bass Peak Level’ from the Manual SP Setup

menu.

The current setting is displayed. When

OFF

is displayed

the attenuator is off (bass output is not affected).

2

Select a setup option.

Setting Start

– The volume is set to –60 dB, a test

tone plays back and you make the setting.

Setting Clear

– Clears any previous setting and

switches limiting off.

3

If you selected ‘

Setting Start’

, use

/

to adjust

the test tones and specify the bass peak level then press

ENTER

.

5 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level of each speaker to 75 dB
SPL (C-weighting/slow reading).

• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.

5.Manual SP Setup

:Return

a.Speaker Setting
b.Channel Level

c.Speaker Distance

d.Bass Peak Level
e.X-Curve
f.THX Audio Setting

5c.Speaker Distance

L

3.0ft

C

[ 3.0ft ]

R

[ 3.0ft ]

SR

[ 3.0ft ]

SBR

[ 3.0ft ]

SBL

[ 3.0ft ]

SL

[ 3.0ft ]

SW

[ 3.0ft ]

:Finish

5.Manual SP Setup

:Return

a.Speaker Setting
b.Channel Level
c.Speaker Distance

d.Bass Peak Level

e.X-Curve
f.THX Audio Setting

5d.Bass Peak Level

:Return

Bass Peak Level

:OFF

[Setting Start

]

[Setting Clear

]

5d.Bass Peak Level

:Return

Bass Peak Level

:OFF

[

Setting Start

]

[Setting Clear

]

Enter:Setting Start

5d.Bass Peak Level

Bass Peak Level

-60dB

Increase the Bass
Peak Level to
a comfortable Volume
(-80=no sound)

ENTER:Finish :Cancel

VSX_84TXSi.book.fm 45 ページ 2006年3月13日 月曜日 午前11時54分

Advertising
This manual is related to the following products: