Turning the efx546 on and off – Precor Commercial EFX EFX546 User Manual
Page 16
page 16
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 9
Connect the power cord.
Power plug
Rear casing
Power cordreceptacle
ON/OFF (I/O) switch
13. Connect the power cord. Diagram 9. Insert the power plug’s connector
into the receptacle at the rear of the base assembly.
CAUTION: Since the EFX546 has two different models (120v and 240v
units), check the label near the unit’s power receptacle to determine the
voltage requirements. Use an appropriate power cord. Do not remove or
otherwise bypass the 3-prong plug with an adapter in order to use a non-
grounded outlet. Do not plug the EFX546 into a power transformer in an
attempt to adjust the voltage requirements. Failure to follow these
instruction’s might damage the unit and void Precor’s limited warranty.
14. Plug the EFX546 into a grounded outlet. Be sure to use the appropriate
voltage requirements. Refer to
Grounding Instructions on the front cover.
TURNING THE EFX546 ON AND OFF
Use the ON/OFF (I/O) power switch to turn the unit ON and OFF. This switch is
located at the rear of the unit, near the power cord receptacle. Refer to Diagram 9.
CAUTION: Never remove or bypass the 3-prong plug on the unit’s power cable
with an adapter. Do not use a non-grounded outlet. Do not plug the EFX into
a power transformer in an attempt to adjust the voltage requirements.
Use the I/O power switch to turn OFF (O) the EFX546 and unplug the unit from
the power outlet when it is not in use for extended periods of time.