Philips 535 - Manual (Page 55)

Messages 53
To enter text and numbers, including specific signs such
as @ or %, see the characters table described page 19.
Settings
Network access
This menu allows you to configure your phone and to
handle the connection to the network, whether GSM
or GPRS, in order to then connect to the appropriate
server that will let you send and receive e-mails.
All options described below are operator and/or sub-
scription dependent.
1. Press
,
, select Messages > E-mail > E-mail 1 >
Settings and press
,
.
2. Select Network Access and press
,
.
Bearer
This menu allows you to select the type
of network used when launching a con-
nection.
GSM or GPRS : your mobile will only use the GSM or
the GPRS network for e-mail connections.
GPRS first : your mobile will first try to connect to the
GPRS network, then to the GSM network if the GPRS
network isn’t available when connecting.
Selecting this option you need to have both GSM and
GPRS settings configured.
GPRS settings
This menu allows you to enter or change
the GPRS settings communicated to you
by your operator, which are:
APN , Login
and Password . All settings must be entered as given to
you by your operator.
Error messages during connections are mainly due to
incorrect parameters: you should contact your operator
before first use, in order to have the appropriate GPRS
parameters.
GSM settings
This menu allows you to enter or change
the GSM settings communicated to you
by your operator, which are:
Phone
number , Auto disconnection , Login and Password . Enter
them as defined.
Phone Number : allows you to enter the phone number
provided by your ISP and needed to establish a connec-
tion. Press
+
or
-
to select:
- ISDN number to enter an ISDN ISP number, OR
- Analogic No. to enter an analogic number, then press
,
.
Bearer
GPRS Settings
GSM Settings
Philips535_EMEA_GB_4311 255 57351.book Page 53 Mardi, 25. novembre 2003 9:25 09