Philips 535 - Manual (Page 62)

60 Messages
page 57). From the Forward to option, proceed as de-
scribed above in “Reply to an e-mail”.
In both cases (reply to an e-mail or forward it), your
phone will disconnect from the server when reaching
the network inactivity time out set in the Auto discon-
nection
menu (see “Bearer” page 53). It will reconnect
to this server when sending the e-mail.
The Broadcast SMS feature is network-dependent.
You can Activate or Deactivate the recep-
tion of SMS broadcast regularly trans-
mitted to all subscribers on the network.
Reception
Allows you to set the reception of cell
broadcast messages
On or Off . When On ,
you must define one or several topics as
described below.
Topics
Allows you to define the type of messag-
es you want to receive. To define a new
type, select
<New> , enter the code pro-
vided by the operator, and, if desired, associate a name.
If you select an existing type in the list, you can change
or delete it. You can enter up to 15 different types in
the list. To obtain the codes corresponding to the dif-
ferent types, contact your operator.
District codes
Allows you to select the type of messages
you would like to be permanently dis-
played on the idle screen. As a result, for
this special treatment of the message, you must enter
the type in both the
District code and the Topics menu.
Allows you to set the Instant message feature On or Off .
When On , any short message (SMS) you receive is au-
tomatically displayed in idle mode.
Scroll down to read it, and quickly reply by pressing
,
twice: first to enter the edition screen, then to
send your message. The phone will automatically go
back to the idle screen.
If you receive a second SMS while you are reading one,
press
c
to exit the first one or reply to it. The mobile
phone will then display the second message.
Broadcast Message
Broadcast SMS
Reception
Topics
Instant message
District Code
Philips535_EMEA_GB_4311 255 57351.book Page 60 Mardi, 25. novembre 2003 9:25 09