Advanced, Write and send an e-mail, To one or several recipients – Philips 535 User Manual

Page 57: End mail

Advertising
background image

Messages

55

Advanced

The menus described in this section feature advanced
settings that may have been pre-configured, so you
shouldn’t have to change any of them.

If the fields of these menus are empty, or if you encoun-
ter connection problems, contact your ISP.

Port POP3

: allows you to enter the POP3 port number,

which is used to receive e-mails.

Port SMTP

: allows you to enter the SMTP port

number, which is used to send e-mails.

DNS address

: allows you to enter the DNS address of

the external data network you want to connect to.

SMPT authenticat.

: allows you to activate/deactivate the

authentication process with the SMTP server.

In most European countries, this menu should be set to
Off

: your e-mails will NOT be sent if set to On. Contact

your provider for complete information.

Write and send an e-mail

The

Send mail

menu allows you to send

e-mails to one or several recipients at a
time, including with an attachment such

as a jpeg picture. Once received, your messages can be

forwarded and the attachments visualised with the ap-
propriate software.

To one or several recipients

1.

Press

,

, select

Messages

>

E-mail

, then

E-mail 1

or

E-mail 2

depending on the one you wish to use.

Select

Send mail

and press

,

.

2.

Move

-

to select

Add addressee

and press

,

to access the list.

If you select the phonebook «On SIM card», you will
not be able to access any e-mail address, but an edit
window will allow you to enter one. See “Phonebook”
page 29
for information on phonebook selection.

3.

Select a name in the list and press

,

to add it

to your mailing list or press

c

to cancel and go

back to the previous sub-menu.

4.

Back to the

Addressees

list, press

,

to

Change

the e-mail address or to

Remove

it from the list, or

select

Add addressee

, press

,

to access the

phonebook again and add new names to the mail-
ing list.

5.

Repeat steps 2 to 4 to add as many recipients as
required.

6.

Select

Validate list

and press

,

. Then enter the

subject of your e-mail (you can leave this field
empty) and press

,

.

Send mail

Philips535_EMEA_GB_4311 255 57351.book Page 55 Mardi, 25. novembre 2003 9:25 09

Advertising