Panasonic DMR-EZ47VEB - Manual (Page 17)

17
RQT8857
Basic Operations
Copying Titles (DVD ¼ VHS)
Preparation:
 Turn on the television and select the appropriate video input to suit the
connections to this unit.
 [VHS] Ensure accidental erasure tab is intact.
 Insert a video cassette with enough space for recording. Stop the tape
at the point where you want to start copying to.
 Select the VHS recording mode (¼ 20).
 Insert the disc containing the programme to be copied.
 [RAM] [-RW‹VR›] Press and hold [STTL ] for about 5 or more seconds to
select the audio you wish to record.
On the main unit
COPYING COPYING
Press and hold for about
3 seconds.
Notes
 If you start copying when the resume
function is activated, the DVD is
copied from the beginning of the title
you stopped play at.
To copy a whole disc, press [
 STOP]
to deactivate it before copying ( ¼ 13).
 When copying doesn’t start, the
“COPYING” indicator on the main unit
blinks for about 7 seconds. Check if
the unit is properly prepared.
Tips
 When you start copying from the selected title
1. Press [DRIVE SELECT] to select the DVD drive.
2. Press [DIRECT NAVIGATOR].
3. Press [
, , , ] to select the recording you want to start, then press [OK].
4. Go to the operation shown above.
 Index signals are automatically recorded on the tape according to the division of titles on
the DVD [ ¼ 38, VHS Index Search System (VISS)].
 To cancel copying in the middle
Press [  STOP].
− You can also press and hold [RETURN] for about 3 or more seconds to cancel copying in
the middle.
All titles on the disc are automatically copied onto the tape.
[RAM] [-R] [-R]DL] [-RW‹V›] [-RW‹VR›] [+R] [+R]DL] [+RW] ¼ [VHS]
COPYING COPYING
COPYING indicator
Tips
Icons such as “ [RAM] ” indicate usable
discs. Refer to pages 70 and 71.
− Check if copying starts properly (“COPY” lights on the unit’s display).
− Copying automatically stops when playback of the disc fi nishes or the tape
reaches its end.