Recording from an external device, Start play on the external device, When you reach that point – Panasonic DMR-EZ47VEB User Manual

Page 24

Advertising
background image

24

RQT8857

Preparation:

 Turn on the unit.
 [RAM] If the disc is protected, release protection

(

¼ 56).

 [VHS] Ensure accidental erasure tab is intact.
 When the output signal from the external device is

NTSC, change the “TV System” to “NTSC” in the
Setup menu (

¼ 63).

This unit cannot record NTSC signals to discs that
already have PAL signal recordings.

 To reduce noise in input from a video cassette

recorder, set “Copy NR” to “On” in the on-screen
display (

¼ 55).

DRIVE

SELECT

to select the DVD or VHS

drive.

– Insert a disc or video cassette with enough

remaining blank space (

¼ 72, 74).

REC MODE

to select the recording

mode (

¼ 20).

Recording from a VCR, etc.

SELECT

INPUT

to select the input where

your external device is connected.

Front panel inputs are AV3.

Tips

 You can also connect to the AV2 on the rear.
 If the audio output of the external device is monaural, connect to

L/MONO on the AV3 input terminals at the front.

To skip unwanted parts
Press [

PAUSE] to pause recording. (Press again to restart

recording.)

To stop recording
Press [

 STOP].

Notes

 When timer recording starts while recording from an external

device, timer recording takes priority and recording from the
external device stops.

Recording from an External Device

Connect cables while both the unit and the external
device are turned off.

Front of the unit

S VIDEO

AV3 IN

VIDEO

/MONO AUDIO R

L

S VIDEO

IN 2

VIDEO

/MONO AUDIO R

L

You can get a
sharper, clearer
picture by connecting
with an S Video cable
instead of the yellow
video cable.

Yellow White Red

S Video cable

Audio/video
cable

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Perform steps

− left.

Start play on the external device.

REC

at the point you want to

start recording to the disc.

PAUSE

to start recording at the

point you desire.

[VHS]
Perform steps

− left.

PLAY

to bring the tape to the

point at which you want to start
recording from.

PAUSE

when you reach that point.

REC

to put the unit in recording

standby.

Start play on the external device.

Recording to VHS

Recording to DVD

Advertising