Linked operations with the tv (viera link, Hdavi control, Q link) – Panasonic DMR-EZ47VEB User Manual

Page 42

Advertising
background image

42

RQT8857

What is Q Link?

[Q\Link]

Q Link is a convenient function that offers linked operations of this
unit and a Panasonic TV. You can use this function by connecting the
equipment with a fully wired 21-pin Scart cable.

What is VIERA Link “HDAVI Control”?

[VIERA\Link]

VIERA Link “HDAVI Control” is a convenient function that offers
linked operations of this unit, and a Panasonic TV (VIERA)
or receiver under “HDAVI Control”. You can use this function
by connecting the equipment with the HDMI cable. See the
operating instructions for connected equipment for operational
details.
 VIERA Link “HDAVI Control”, based on the control functions

provided by HDMI which is an industry standard known as HDMI
CEC (Consumer Electronics Control), is a unique function that
we have developed and added. As such, its operation with other
manufacturers’ equipment that supports HDMI CEC cannot be
guaranteed.

This unit supports “HDAVI Control 2” function.

“HDAVI Control 2” is the newest standard (current as of February,
2007) for Panasonic’s HDAVI Control compatible equipment.
This standard is compatible with Panasonic’s conventional HDAVI
equipment.

Linked Operations with the TV (VIERA Link

“HDAVI Control

TM

”/Q Link)

You can enjoy linked operations with the TV and receiver by using “VIERA Link” or Q Link.

Preparation:

1. Connect this unit to your TV or receiver with an HDMI cable

(

¼ 69).

2. Set “VIERA Link” to “On” (

¼ 63). (The default setting is “On”.)

3. Set the “HDAVI Control” operations on the connected equipment

(e.g., TV).
When using HDMI2 terminal of VIERA as “HDAVI Control”,

set the input channel to HDMI2 on VIERA.

4. Turn on all “HDAVI Control” compatible equipment and select

this unit’s input channel on the connected TV so that the “HDAVI
Control” function works properly.
Also when the connection or settings are changed, repeat this
procedure.

1

This button is available only when this unit is on.

2

When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents

from where playback started.
In this case, press [

] or [] to go back to where playback started.

(When the TV is on)

Easy playback

[VIERA]Link] [Q]Link]

When the TV is on and the following operations are performed, the TV’s input will
automatically switch to HDMI input mode (

[VIERA\Link]

) or AV input mode (

[Q\Link]

) and the

TV displays the corresponding action.
(Picture or sound may not be available for the fi rst few seconds.)
Press [FUNCTION MENU]

1

, [



PLAY]

2

, [DIRECT NAVIGATOR], [GUIDE],

[PROG/CHECK] etc.

(When the TV is off)

Power on link

[VIERA]Link] [Q]Link]

When the TV is off and the following operations are performed, the TV will
automatically turn on and displays the corresponding action.
(Picture or sound may not be available for the fi rst few seconds.)
Press [FUNCTION MENU]

1

, [



PLAY]

2

, [DIRECT NAVIGATOR], [GUIDE],

[PROG/CHECK] etc.

Power off link

[VIERA]Link] [Q]Link]

When you turn the TV off, the unit is also automatically turned off. The unit is automatically
turned off even if the FUNCTION MENU screen, the status message or the on-screen display is
displayed, during playback or when the unit is set to a timer recording.

Even if the TV is turned off, the unit will not be turned off at the same time in the following conditions:
– when you pressed [

 REC] and this unit is recording

– when copying
– when fi nalising, etc
 When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable, the

receiver will also turn off.

Direct TV

Recording

[Q]Link]

This function allows you to immediately start recording the programme that you are
viewing on the TV. (

¼ 21)

 When the TV is in the HDMI input mode, this function is not available. Switch to other mode except for the

HDMI input mode and use Direct TV Recording.

However this function does not work if you select the TV channels on this unit.

Preparation:

Connect this unit to your TV with a fully wired 21-pin Scart cable

(

¼ 8, 9).

Notes

The following systems from other manufacturers have similar
function to Q Link from Panasonic.
For details, refer to your television’s operating instructions or consult
your dealer.
Q Link (registered trademark of Panasonic)
DATA LOGIC (registered trademark of Metz)
Easy Link (registered trademark of Philips)
Megalogic (registered trademark of Grundig)
SMARTLINK (registered trademark of Sony)

Advertising