Panasonic PV-D4735S - Manual (Page 19)

19
Add or Delete a Channel
To add channel:
Select channel with NUMBER keys
and press ADD/DLT.
To delete channel:
Select channel with CH
/ or
NUMBER keys and press ADD/DLT.
Time Zone Adjust
2) Press to select
“TIME ZONE ADJUST,”
VCR’s Output
Channel
1) Press to select
“VCR’S OUTPUT CH.,”
and press SET.
2) Press SET.
3) Press ACTION.
After 3 seconds
• To Make Corrections,
repeat steps 1) ~ 3).
DST (Daylight Saving Time)
DECK auto adjusts clock for DST.
(p. 17.)
Spring (First Sunday in April)
DST:ON
➛ ➛ ➛ ➛ ➛ Sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON
➛ ➛ ➛ ➛ ➛ Turns clock back one hour.
• If your area does not observe
Daylight Saving Time, select
DST:OFF.
• Keep these time changes in mind
when programming DECK for timer
recordings.
1) Press to select
“SET CLOCK,” and
press SET.
and press SET to
subtract or add hour(s)
as necessary.
*Important: If a remote control button does not work
when pressed, press the VCR button
on the remote and try the button again.
(Only when Auto Clock is set.)
3) Press ACTION.
• “TIME ZONE ADJUST”
returns to “0” if clock is
set manually.
➡
VCR’s Output Channel
Basic Operation
VCR
ACTION
SET
SELECT
POWER
NUMBER
keys
ADD/DLT
CH /