Copying your tapes (dubbing), Connection – Panasonic PV-D4735S User Manual

Page 35

Advertising
background image

35

VCR Operation

Copying Your Tapes (Dubbing)

1

Insert a pre-recorded tape.

2

Insert a blank tape with record tab.

Press REC, then STILL/PAUSE
immediately to enter REC/PAUSE mode.

3

Press INPUT to set DECK Input mode to
LINE for Video Input.

(See “Selecting the Input Mode” below.)

4

Press PLAY to start dubbing.
Playing VCR starts playback.

Press STILL/PAUSE to start dubbing.
DECK starts recording.

Press STOP to stop dubbing.

Caution:

• Unauthorized exchanging and/or copying of copyrighted recordings may be

copyright infringement.

• Please note that some tapes cannot be dubbed on DECK.

Also, it is not possible to dub DVD/ Video CD/ CD to VHS tapes using DECK.

• When

appears on the screen while a button is being operated, it means that

the corresponding operation is prohibited by DECK or the disc.

Playing (Source) VCR

Recording (Editing) DECK

5

To Monitor Dubbing on TV

1 Turn TV on and tune to the Recording VCR

channel (CH 3 or CH 4).

2 If Auto VCR/TV (see p. 34) is set to “OFF,”

press VCR/TV on the remote for VCR
mode.

• Dubbing tapes protected with Copy

Guard will result in poor quality
recordings.

Connection

Press STOP to stop dubbing.

Press PLAY, then PAUSE immediately
to enter PLAY/PAUSE mode.

Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.
To monitor the dubbing, also connect TV as shown.

Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R” AUDIO IN
terminals on DECK.

In place of Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit’s Audio/Video outputs to DECK.

Selecting the Input Mode

Method 1: Press INPUT repeatedly.

Channel Number

➛ LINE1 ➛

➛ LINE2

Method 2: Press CH / .

Display will change as below.

Front of DECK

VIDEO IN 2

L-AUDIO IN2-R

(Audio/Video In Terminals
on the front of DECK are
available)

IN FROM ANT.

OUT TO TV

IN 1

VHF/UHF

OUT

TV

OUT

VHF/

UHF

DVD/VCR DECK

VIDEO

AUDIO1

L
R

VCR/ Camcorder

(Hi-Fi)

VIDEO

AUDIO

L

R

• LINE1: For rear audio/video connection.

LINE2: For front audio/video connection.

1

2

1

2

3

125

LINE1

(CABLE)

69

(TV)

or

LINE2

Press

Press

The operation of steps 4 and 5 must be done on the
playing and recording VCRs at the same time.

Note

Advertising