Panasonic SC-DK20 - Manual (Page 55)

55
Timer and others
RQT6345
SELECT
ENTER RETURN
L R
LS RS
Exit
SW
ms
c
0
ms
0
SETUP
D1: The distance from the front speaker
D2: The distance from the center speaker
D3: The distance from the surround speaker
Center speaker delay time
If D1 W D2, then set delay time to 0 ms.
If D1
>
D2, then set delay time as follows:
Center delay time
Surround delay time
Delay time
(Dolby Digital, center and surround speakers only)
The sound from speakers can reach the listening position at different times depending on placement. You can allow for this difference by changing
the delay time of the center and surround speakers.
Difference between D1 and D2
50 cm (1 1 / 2 feet)
100 cm (3 feet)
150 cm (5 feet)
200 cm (6 feet)
Delay time
1.3 ms
2.6 ms
3.9 ms
5.3 ms
Calculating delay time
Surround speaker delay time
If D1 W D3, then set delay time to 0 ms.
If D1
>
D3, then set delay time as follows:
Difference between D1 and D3
200 cm (6 feet)
400 cm (12 feet)
600 cm (18 feet)
Delay time
5.3 ms
10.6 ms
15.9 ms
Changing the delay time
1. Press the cursor buttons to select the delay time box and press
[ENTER].
2. Press [ 8 ], [ 9 ] to adjust the delay time and press [ENTER].
When you are finished
Press [
; ] to select “Exit” and press [ENTER].
LS RS
L R
C
D2
D1
D3
SW
Ideal position of the
center speaker
Ideal position of
the surround
speaker
It is recommended to place all the
speakers inside this circle.
Exit