Panasonic SV-AP10U - Manual (Page 34)

Connecting and Operating with a personal computer
34
Installing the Printer Driver (Cont.)
1 Turn on the personal computer and install the supplied
CD-ROM into the CD-ROM drive.
2 Turn on the Photo Printer.
3 Connect the Printer to the PC using the USB connection
cable.
≥The [Add New Hardware Wizard] screen appears.
≥Depending on your PC environment, step 4 and 8 may be skipped.
If this is the case, proceed from step 9.
4 Click the [Next] Button.
≥The [Add New Hardware Wizard] screen appears.
≥If the [Add New Hardware Wizard] screen does not appear, please
refer to page 35.
5 Click the [Next] Button.
≥Confirm whether your device is configured to the optimal driver
detection setting.
6 Check the location to be specified and enter the path as
"D:\Win9X-ME" if your system is Windows 98SE. Enter
the path as "D:\Win2K-XP" if your system is Windows
2000 (example of D drive assigned as CD-ROM drive).
7 Click the [Next] Button.
≥Re-click the [Next] Button when the search confirmation screen
appears.
≥The message [File *****.DLL is not found] can be displayed
depending on the environment of PC. Many PCs may install this
file on the Hard Disk. Click [Refer] and select
[C:\windows\option\cabs].
≥If your system is Windows 2000, proceed to step 13.
8 Click the [Finish] Button.
9 [Add New Hardware Wizard] screen appears again. Click
the [Cancel] Button.
10 Restart the computer.
11 [Add New Hardware Wizard] screen appears again.
Repeat the steps from 4 through 7.
12 Select [No] when the [Add Printer Wizard] screen
appears.
≥Select [Yes] to set as the default printer.
13 Click the [Finish] Button.
≥The driver setup is completed.
≥Please read also the “Notes on Installation of Printer Driver” (
l 39)
carefully.
≥When installation is not finished correctly or the message is
displayed, refer to [Readme.txt] file in the supplied CD-ROM.
For Windows 98SE/2000
5
6
4,9
12,13
11
8
7
AP10U-Eng.book 34 ページ ２００２年９月２７日 金曜日 午前１０時８分