Panasonic SV-AP10U - Manual (Page 51)

Others
51
Error Messages for Printer Driver
≥Please wait until the temperature of printer
decreases.
→ Please wait for a while.
≥Please check a paper cassette or paper.
→ Insert the paper into the paper cassette and the paper
cassette into this unit.
≥There is no ink.
→ Insert the new ink cassette.
≥A paper jam has occurred.
→ Remove the jammed paper and eject/insert the ink
cassette.
≥Hardware Error occurred. Please abort printing.
→ Consult your dealer.
≥The printer is not corresponding to this printer
driver. Please abort printing.
→ Install the driver again.
≥Error occurred. Turn the printer's power off and then
back on, and then click [Restart] for printing or click
[Abort] to abort printing.
→ Restart the job or abort printing after turning the Photo
Printer off and on.
≥Communication with the printer has failed. First,
check that the printer is connected properly, and
click [Restart] to start printing or click [Abort] to
stop printing.
→ Turn the Photo Printer’s power off and then back on or
disconnect and reconnect the USB connection cable.
Then restart the job or stop the printing.
≥The selected print size does not match the paper
and ink cassette you have inserted.
→ Confirm that paper corresponding to the ink cassette is
set and restart the job.
≥Paper is incorrect. Please set properly.
→ Insert correct paper and make sure paper is correctly
set.
AP10U-Eng.book 51 ページ ２００２年９月２７日 金曜日 午前１０時８分