Panasonic CQ-VX2200W - Manual (Page 29)

35
CQ-VX2200W
1
E
N
G
L
I
S
H
26
❏ Precautions
Be sure to remove the bracket for transportation
before use (installation).
CUse screws (5 mm φ x 8 mm) with washers for
installation.
Be careful not to lose any of these parts.
Transportation Bracket x 2
CQ-VX2200W
Screw with washer
(5 mm
φ × 8 mm) x 4
¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
hands and fingers.
Note: Use a pench to bend the
fingers on the bracket vertically.
Bracket (L)
Bracket (R)
CQ-VX2200W
Appended Screws (q or w).
Select appropriate ones matching
the hole shape of the bracket.
w Flat-Head
Screw x 8
(5 mm
φ x 8 mm)
Note: Binding-Head screws (5 mm
φ
x 8) q are appended four pieces, the
other four pieces are fixed on the
transportation bracket. [Screw with
washer (5 mm φ x 8 mm)]
q Binding-Head
Sdrew x 8
(5 mm φ x 8 mm)
❏ Typical Installation (For vehicle with double-DIN size)
1. Remove Car radio or little object box from the vehicle and the stopping brackets.
2. Use the appended screws q or w to install the brackets on this unit.
3. Install this unit into the vehicle.
¡If a special kit (option) is necessary for a certain year’s, model or grade of
vehicle, please consult your dealer.
¡For electrical connecting simply to your vehicle, you can buy a prepared
power connector from your dealer.
Transportation bracket removal
Note:
¡The screw holes on the right side are not tapped. Please only use screws provided to mount the unit.
¡To tighten the screws, press its head down straight forward.
❏ Installation for except for the above motors
For general use kit (option) or motor’s special kit (option), Please consult your dealer.