Panasonic CQ-VX2200W - Manual (Page 30)

Power Connector
Illumination Lead
To the power line connected to
the side marker lights of the car
Antenna Control Cord
To the auto antenna control power
cord of the car (Max. 0.1 A)
(Orange / white stripe)
External Amplifier Control Power Lead
To an external amplifier (Max. 0.1 A)
(Blue / white stripe)
ACC Power Lead
To ACC power, +12V DC
(Red)
Resistor 1 k
Ω
Battery Lead
To the car battery, continuous
+12V DC
Ground Lead
To a clean, bare metallic part of
the car chassis
(Yellow)
Fuse (10A)
(Black)
(Blue)
Front Speaker Lead
Rear Speaker Lead
CD/Cassette Receiver
CQ-VX2200W
36
CQ-VX2200W
27
E
N
G
L
I
S
H
Electrical Connections
❏ Wiring Diagram
Note: If your car does not have a power line connected to the side marker lights of the car, leave the illumination lead disconnected.