Panasonic CQ-VX2200W - Manual (Page 39)

45
CQ-VX2200W
1
E
N
G
L
I
S
H
36
Specifications
General
Power Supply
: 12 V DC (11 V - 16 V), test voltage 14.4 V, negative ground
Current Consumption : Less than 8.5 A (CD play mode)
Rated Output : 16 W x 4 ch (1 kHz, 1%, 4 Ω)
Maximum Power Output : 41 W x 4 ch
Suitable Speaker Impedance : 4 Ω
Audio Input Impedance : 10 k
Ω (AUX IN)
Audio Input Voltage : 2 V (AUX IN)
Pre-out Output Voltage : 2 V
Pre-out Output Impedance : 600
Ω
Dimensions (W x H x D) : 178 x 100 x 160 mm
Weight : 2.4 kg
DSP
Number of Channels
: 2 input channels, 4 output channels
Space mode : 7 mode
Equalizer Center Frequency : 80, 160, 320, 640, 1.6 k, 4 k, 10 k (Hz)
Variable Range of Equalizer : –12 to +12 dB (13 steps)
FM Stereo Radio
Frequency Range
: 87.5 - 108 MHz
Usable Sensitivity : 12 dBf.
Total harmonic distortion (mono) : 0.3 % (1 kHz)
Weighted S/N ratio (mono) : 60 dB
Frequency Response : 20 Hz – 15 kHz (± 3 dB)
Stereo Separation : 42 dB (at 1 kHz)
Image response ratio : 75 dB
AM Radio
Frequency Range
: 531 kHz - 1,602 kHz
Usable Sensitivity : 27 dB/µV
Image response ratio : 65 dB
CD Player
Channel
: 2 channels
Quantization : 16-bit liner
Frequency Response : 5 Hz - 20 kHz
Dynamic range : 90 dB (IHF, A)
Wow and Flutter : Below measurable limits
Cassette Tape Player
Reproduction system
: 4-track, 2-program stereo
Tape Speed : 4.76 cm/sec
Fast Forward Time : 100 sec (C-60)
Rewind Time : 100 sec (C-60)
Wow and Flutter : 0.07 % (WRMS)
Signal/Noise Ratio : Dolby B NR OFF 56 dB (IHF, A)
Dolby B NR ON 66 dB (IHF, A)
Frequency Response : 30 to 18,000 Hz (normal tape)
30 to 20,000 Hz (metal tape)
Note : Specifications and the design are subject to modification without notice due to improvements in technology.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol B are trademarks of Dolby Laboratories Licensing Corporation.