Pioneer DVR-745H-S - Manual (Page 33)

Recording 05
33
En
HDD Video mode compatibility
When recording to the HDD you can choose
to record in one of two formats. Set the
format from the HDD Recording Format
item in the Initial Setup menu (see
page 113).
Taiwan and Philippines model:
When set to Video Mode On, high-speed
copying from HDD to Video mode DVD-R/-
RW or DVD+R/+RW is possible. When
recording a broadcast with a Secondary
Audio Program (SAP) channel, set which
channel you want to record from the Initial
Setup menu (see
Dual Mono Recording on
page 109).
When HDD Recording Format is set to Video
Mode Off, high-speed copying isn’t possible.
However, when SAP is selected as the
broadcast audio channel, both the main and
SAP channels are recorded and you can
switch the audio on playback.
Other:
When set to Video Mode On, high-speed
copying from HDD to Video mode DVD-R/-
RW or DVD+R/+RW is possible. When
recording a bilingual broadcast, set which
channel you want to record from the Initial
Setup menu (see
Bilingual Recording on
page 109).
When HDD Recording Format is set to Video
Mode Off, high-speed copying isn’t possible.
However, both channels of bilingual
broadcasts are recorded and you can switch
the audio on playback.
Recorded audio
In all except the LPCM mode, sound is
recorded in two channel Dolby Digital format
(only Dolby Digital 2.0 can be recorded; Dolby
Digital 5.1 recording is not possible)
. When
set to LPCM , sound is recorded in high
quality, uncompressed Linear PCM format.
Taiwan and Philippines model:
If the broadcast audio has a SAP channel
and you are recording to Video mode DVD-R/
-RW, DVD+R/+RW, or to the HDD with the
HDD Recording Format set to Video Mode
On, or on the
LPCM setting, use the AUDIO
button to select the Mono , Stereo or SAP
audio channel to record before recording
starts. In other cases, if SAP is selected then
both the main and SAP audio channels will
be recorded and you can switch on playback.
The table below shows the different audio
output possibilities:
Other:
If the broadcast audio is bilingual and you
are recording to Video mode DVD-R/-RW,
DVD+R/+RW, or to the HDD with the HDD
Recording Format set to Video Mode On, or
on the
LPCM setting, use the Bilingual
Recording setting (page 109) to select the A/
L or B/R audio channel to record before
recording starts. In other cases, both
channels of a bilingual broadcast will be
recorded and you can switch on playback.
Audio
setting Audio output
Left (L) Right (R)
MONO L + R L + R
STEREO L R
SAP L + R SAP
DVR745H_IBD_EN.book 33 ページ ２００６年７月２７日 木曜日 午後４時１１分