Recording 05 – Pioneer DVR-745H-S User Manual

Page 37

Advertising
background image

Recording

05

37

En

2

Select a TV channel to record.

The front panel display shows the channel
number:

• While the recorder is stopped, you can

also use the number buttons on the
remote to select the channel (For
channel 24, press

2, 4

then

ENTER

).

• If the recorder is stopped, you can also

use the

CH

+/–

buttons on the front

panel to select the channel number.

3

Set the picture quality/recording

time.

• See

Setting the picture quality/recording

time

on page 36 for detailed instructions.

4

Select the audio channel to

record.

See

Changing audio channels

on page 35 for

more on this.

Taiwan and Philippines model:

• When recording in VR mode (DVD) or

with HDD Recording Format set to Video
Mode Off (HDD), both mono and SAP
audio channels are recorded, allowing
you to switch the audio channel on
playback. The only exception to this is
when the picture quality is set to

LPCM

,

in which case you do need to select the
audio channel before recording.

Other:

• When recording in VR mode, if a

broadcast is bilingual, both audio
channels are recorded, allowing you to
switch the audio channel on playback.

The only exception to this is when the
picture quality is set to

LPCM

, in which

case you do need to select the audio
channel before recording.

5

Start recording.

If you want to set a recording end time, press
the

ì

REC

button repeatedly. The recording

time increases in 30 minute increments, up
to a maximum of six hours. The time the
recording will end is shown on-screen and in
the front panel display. When the recording
ends, the recorder automatically switches
into standby if no other operation is being
performed.

• To cancel the set recording time, press

ì

REC

.

• If you want to pause recording at any

time

1

, press

PAUSE

. Press again to

restart the recording (If recording to the
HDD, DVD-RAM or in VR mode, a new
chapter is started after recording
restarts).

6

Press to stop recording.

• If you set the recording time in the

previous step, you can still stop the
recording anytime by pressing

STOP

REC

.

• Recording will stop automatically when

there is no more space on the HDD/
DVD, or after 12 hours of HDD recording
(whichever is sooner).

CH

Channel number

REC MODE

AUDIO

Note

1 Except during Chase Play.

REC

ì

STOP REC

DVR745H_IBD_EN.book 37 ページ 2006年7月27日 木曜日 午後4時11分

Advertising