Pioneer DVR-745H-S - Manual (Page 81)

Copying and backup 09
81
En
• Titles recorded in MN1 to MN6 , SEP , SLP
or EP mode cannot be copied to DVD+R/
+RW using One Touch Copy.
Copying to the HDD
• The maximum title length for copying is
12 hours.
• Title name and chapter markers are also
copied, except when copying from a
finalized Video mode disc.
• Thumbnail picture markers and chapter
markers for the Disc Navigator are
copied, but their position in the copy
may be slightly changed from the
original.
• If some part of the title being copied is
copy-protected, copying will start, but
the copy-protected portions will not be
copied.
Using Copy Lists
* See also Copyright on page 79.
At its simplest, a Copy List is just a list of
HDD or DVD titles that you want to copy.
When copying HDD titles to DVD, you can,
however, edit the titles in your copy list,
erasing chapters you don’t need, or re-
naming titles, for example. Edits you make to
titles in the Copy List do not affect the actual
video content; only the ‘virtual’ content of the
Copy List. So you can freely erase and modify
anything in your Copy List safe in the
knowledge that the actual content is not
being altered.
Copying from HDD to DVD
Important
• Unless otherwise stated, the OSDs
shown in this manual are for the Taiwan
and Philippines model.
• The recorder can only store one Copy List
at a time.
• The Copy List is erased if the Input Line
System setting is changed (see
Additional information about the TV
system settings
on page 116).
• Resetting the recorder to its factory
settings (see Resetting the recorder on
page 133) will erase the Copy List.
1 Load a recordable DVD.
• It is possible to complete the following
steps without having a recordable DVD
loaded (or having an uninitialized DVD
loaded); however, the steps are slightly
different.
• If you want to use a DVD-RW (VR mode)
disc for the copy, make sure it is
initialized before you start.
2 Select ‘Copy’ from the Home
Menu.
3 Select ‘HDD DVD’.
If this is the first time to create a Copy List,
skip to step
5 below.
4 If there is already a Copy List stored
in the recorder, choose whether to
‘Create New Copy List’ or ‘Continue
Using Previous Copy List’.
• If you select Continue Using Previous
Copy List , skip to step 10 below.
• Selecting Create New Copy List will
erase any Copy List already stored in the
recorder.
HOME
MENU
ENTER
HDD DVD
Disc Back-up
DVD/CD HDD
Continue Using Previous Copy List
Create New Copy List
DVR745H_IBD_EN.book 81 ページ ２００６年７月２７日 木曜日 午後４時１１分