Parker Hannifin PA Series - Manual (Page 44)

Chapter 4: Maintaining the PowerStation Performing Internal Maintenance
PA PowerStation User Guide
4-7
4
Lift the backshell off of the PowerStation to expose the board.
You are now ready to perform any internal maintenance necessary.
Closing the PowerStation
1
Replace the backshell on the PowerStation.
2
Remount the PowerStation in the enclosure, refer to Installing the PA
PowerStation on page 2-7.
3
Reconnect the following cables:
•
Power Input cable
• Ground cable
• any communication cables
• any keyboard and mouse cables
4
Turn on the PowerStation.