Parker Hannifin PA Series - Manual (Page 58)

Appendix A : PowerStation Specifications Electrical Specifications
PA PowerStation User Guide
A -6
Electrical Specifications
The PA PowerStation’s power supply automatically detects the input
voltage level and adjusts accordingly. However, always use reliable
sources of power, and isolate all communication cables from AC power
lines to enhance noise immunity.
If possible, locate the PA PowerStation away from machinery that produces
intense electrical noise (arc welders, etc.). Otherwise, isolate the input
power to the PowerStation from the equipment generating electrical noise.
The PA PowerStation’s electrical specifications appear in Table A-8.
Table A-8: Electrical Specifications Chart
Caution: Do not apply AC power to the unit or damage may occur.
Category
5”, 6”, 8”, and 10”
Units
15” Units
Input voltage 12/24 VDC @ 18W
(Range: min 11 VDC,
28 VDC max)
24 VDC @ 22W
(Range: min 18 VDC,
28 VDC max)
Fuse Littlefuse Nano SMF
Slow Blow Type fuse.
The part number is
R454 002. Littlefuse Nano SMF
Slow Blow Type fuse.
The part number is
R454 002.
Heat
Dissipation 10 Watts Maximum 10 Watts Maximum