Panasonic CT-36SX31E - Manual (Page 16)

- 16 -
R
G
B
As the yoke is tilted
vertically, the rasters
produced by the
outside guns rotate in
opposite directions.
Figure 17. Vertical Yoke Movement
R G B
Raster produced from one of the
outside electron beams
Raster from the other side electron
beam
Static convergence magnets are set for
center convergence
As the yoke is tilted horizontally, one
raster gets larger while the other gets
smaller
Figure 18. Horizontal Yoke Movement
6 Poles
4 Poles
2 Poles(Purity) 2 Poles(VRS Adj)
For Adjustment
of DY (Y HC /Y V /X V )
Dynamic Convergence
Figure 19. Convergence Magnets and Wedges Location
IMPORTANT NOTE:
Always Exit the Serviceman
Mode Following Adjustments.