Panasonic KX-FPC161 - Manual (Page 15)

15
Setup (Base Unit)
For fax advantage assistance, call 1-800-435-7329.
Recording paper !
Note for recording paper:
● Avoid using paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or
paper used for resumes.
● Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.
● Avoid extremely smooth or shiny paper that is highly textured.
● Avoid paper that is coated, damaged or wrinkled.
Note:
● Avoid double-sided printing.
● Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the
paper may jam.
● Some paper only accepts print on one side. Try using the other side of paper if you are not happy with
the print quality.
1 Fan the stack of paper to prevent a paper
jam.
2 Pull the tension bar forward and hold open
while inserting the paper.
● The paper should not be over the tab.
● If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
Recording
paper
entrance
Printing side
is back.
Tension bar
Tab
Stack of
paper
Correct Incorrect
Adding paper
1. Pull the tension bar forward and hold open while
removing all of the installed paper.
2. Add paper to the removed paper and straighten.
3. Fan the stack of paper.
4. Pull the tension bar forward and hold open while
inserting the paper.
Tension bar
Letter, legal or A4 size recording paper can be loaded. The unit can hold up to 50 sheets of
60
g /m 2 to 75 g /m 2 (16 lb. to 20 lb.) paper or 30 sheets of 90 g /m 2 (24 lb.) paper.
For best results, only use inkjet paper such as Hammermill Jet Print. If you use other
types of paper, the print quality may be affected.
– To use legal size paper, please install an optional legal paper tray, Model No. KX-FA50C
(p. 8, 14).
– To use A4 size paper, see page 14.