Panasonic BL-WV10A - Manual (Page 110)

6 Setup Menu
110
Note
• When registering a preset, the white balance and brightness settings used at
the time of registration will also be saved. This settings will be effective when
the camera moves to the preset position.
White Balance Choose from Auto, Incandescent, Fluorescent 1, Fluorescent
2, Outdoor, or Manual
*1
.
Auto Return Choose either none or a duration between one and thirty
minutes. For the camera in question, if no operation occurs
during the specified time, the sensor position will move to the
lens direction. It can be set to automatically move to the lens
direction for Sensor Alert and sensor recording.
Refresh Rate Choose an interval to refresh the monitoring image from
among motion, 3s, 5s or 10s. When publishing the camera
externally, this setting can be used to avoid an excessive
invasion of privacy. If the update interval is set to a value other
than motion, image recording can occur for a longer period of
time as a result.
Image Quality The quality of the monitored image can set to the standard
setting, or to favor either clarity or motion.
*1 When selecting [Manual] for the white balance value, the white balance value you choose
will be maintained. Any setting other than manual will be constantly adjusted by the
camera. If the color balance seems odd during monitoring, wait until a predominantly
white image appears well before selecting manual.
Setting Description