Panasonic BL-WV10A User Manual
Page 46
2
Connecting Cameras
46
2.
Select [Admin. User Name] and press [ENTER].
•
The character input screen is displayed.
3.
Enter the user name (to learn more about character entry, see page 121).
4.
Select [Admin. Password] and press [ENTER].
•
The character input screen is displayed.
5.
Enter the password and press [ENTER].
6.
Press [RETURN].
•
You will return to the [Basic Setup] screen.
7.
Select [Finished] and press [ENTER].
•
The confirmation screen will appear.
8.
Select [Yes] and press [ENTER].
•
Quick Setup will start.
Note
•
The administrator name and password must be between 6 and 15
alphanumeric characters in length. The following characters cannot be
used:
" < > : &.
Note
•
If the cameras are set to the default settings, user names and passwords will
be automatically assigned without a need for you to set the administrator name
and password. Images from cameras for which the user names and passwords
are not equal to the administrator name and password, however, will not be
visible with a computer. To view camera images on a computer, Quick Setup
must be performed after setting the administrator name and password (using a
minimum of 6 characters each) for the camera.