Philips KX-HCM8 - Manual (Page 108)

Operating Instructions
108
Update
Firmware has
not finished. When Update Firmware is interrupted by power off, or for network
troubles and other problems, follow the procedure below.
* 1 Refer to page 82 for the Update Firmware.
About Network Camera Setup
Problem Cause and Remedy
No
Top Page
Update
Firmware
window
Yes
Turn on Network Camera and the PC.
Enter the IP address on the web browser to access
Network Camera.
Top Page or Update
Firmware window?
Is the Version wished number?
Access Setup Page or Status window.
Check the Firmware Version Number.
Perform Update
Firmware*
1 .
Update Firmware is completed.