Philips KX-HCM8 - Manual (Page 48)

Operating Instructions
48
(10) External Output
Control
Sets the External Device Control Output setting to
attach external sensors/devices. (Open or Short to
GND) Refer to page 78 and page 91.
(11) Indicator Control Sets Power Indicator operation. Indicator will be
turned on in the default. Refer to page 79.
(12) Status Displays general information of Network Camera.
Refer to page 80.
(13) Restart Restarts Network Camera retaining any settings you
entered. If any operational issues are changed, try
this option first. Refer to page 81.
(14) Update Firmware Updates the program to operate Network Camera
on the latest version of the system. Refer to page
82.
(15) Reset to Factory
Default
Initializes all the parameters to the factory default.
Note that all customer-applied settings will be lost,
requiring you to reconfigure Network Camera. Refer
to page 85.
(16) Help Provides you with detailed instructions of the terms
and functions of Network Camera.
Item Description