Philips KX-HCM8 - Manual (Page 24)

Operating Instructions
24
2.4.2 Setting IP Address of the PC in [Type 4]
Configuration Type
Your PC needs to have a static private IP address to access Network Camera in
[Type 4] configuration.
1.
Follow the steps below, appropriate for your operating system to open TCP/IP
Properties window on the PC.
Note
When using Windows NT, Windows 2000 and Windows XP, log on as an
administrator ID to access TCP/IP Properties window.
TCP/IP Properties Table
Operating
System
Steps
Windows 95
Windows 98
Windows Me [Start] –> [Settings] –> [Control Panel] –> [Network] –>
Select [TCP/IP] with adaptor in use –> [Properties] –>
[Specify an IP address]
Windows NT [Start] –> [Settings] –> [Control Panel] –> [Network] –>
[Protocols] tab –> [TCP/IP Protocol] –> [Properties] –>
Select [Adaptor] in use –> [Specify an IP address]
Windows
2000 [Start] –> [Settings] –> [Control Panel] –> [Network and
Dial-up Connections] –> [Local Area Connection Icon] in
use –> [Properties] –> Select Internet Protocol [TCP/IP]
–> [Properties] –> [Use the following IP address]
Windows XP [Start] (–> [Settings]) –> [Control Panel] –> [Network and
Internet Connections] –> [Network Connections] –>
[Local Area Connection Icon] in use –> [Properties] –>
Select Internet Protocol [TCP/IP] –> [Properties] –> [Use
the following IP address]