Precor p20 - Manual (Page 66)

16
Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. Before you begin assembly, make sure that
your hardware kit is complete. If not, please contact Precor
Customer Support.
Fasteners Quantity
Locknuts (⁵₁₆-inch) 8
Hex head screws
(⁵₁₆-inch x 1³₄-inch)
4
Flat washers (⁵₁₆-inch) 8
Flat head hex drive
screws (¹₄-inch x ³₄-inch)
4
Plastic boots 2
End caps 2