Precor p20 - Manual (Page 82)

32
Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers
Connecting the Heart Rate Sensor Cable
The heart rate sensor cable passes through the cutaway
opening at the upper left corner of the back plate, then down
to the small circuit board at the lower left of the console. The
following illustration shows how the cable should look once it
is installed.
Figure 14: Connecting the heart rate cable
Connecting the Power Cable
A power splitter cable provides power to the tuner and
display. To connect the power cable, route it through the
cutaway opening at the upper left corner of the back plate and
plug it in to this adapter.
The following illustration shows how the cable should look
once it is installed.
Figure 15: Connecting the power cable