Polycom SpectraLink DCE201 - Manual (Page 22)

SpectraLink 8002 Wireless Telephone User Guide
22 1725-36027-001_C.doc
are participating in a voice call on another line. If the Rsme (resume)
softkey is pressed to activate a call on a newly selected line, any
previous active call is placed on hold status.
Favorites menu
The Favorites menu provides access to a predefined list of dial
numbers. The list is programmed by the system administrator and
may include generic or specific entries. For specific entries, the user
must provide a list of numbers to the system administrator for
programming. Numbers on the Favorites list cannot be programmed
in or through the handset by the end user.
The Favorites list can include either complete dial numbers for named
parties or partial numbers that need additional data entry. Here is a
partial entry example: If a PBX feature access code for call forwarding
is defined in the Favorites list but you need to add the forwarding
destination information before sending the call to the PBX to activate
the feature.
To access the Favorites list, while in a dialing state press the
Favr
softkey to display a menu of pre-defined numbers or names that can
be dialed (as programmed in the SIP TFTP configuration file.) When
an item is selected from the list, the dial number is displayed. You
may edit or add digits to the displayed number if necessary before
pressing
START to place the call. When using the Favorites menu to
perform a blind transfer to someone on the list, select an entry from
the Favorites menu and then press
FCN and select Transfer .
FCN menu
Pressing the FCN key from the active mode displays a list of telephony
options available to the user. Included here are transfer and do-not-
disturb functions.
The FCN menu is accessible while in the active mode and provides
these features:
Transfer
Do Not Disturb
Set/Clear Forward
<OAI>
<OAI>
<OAI>